Transfer Balls are ideal for light and heavy products slide in easily, safely and evenly shaped in any direction with minimal effort.
Transfer balls Rackart are distinguished in the market by being the highest capacity in the market compared with those of the same shape and size.
Transfer Balls are manufactured with high quality materials, precise manufacturing and perfect assembly of components.
The main ball can be Nylon, Carbon Steel in its Stainless Steel 1000 or 400 series in its series and their diameters vary from 5 / 8 "to 1-1 / 2". This main ball that supported on a large number of small pre balls lubricated which perfectly fit in the assembly against a hardened and galvanized cup which supports against the housing. The construction of the housing may be Carbon Steel or Stainless Steel and its forms or form of attachment may vary, such as flange 2 or 4 holes, flying saucer Flanged, threaded rods of different diameters, recessed, or NPT threaded pipe . These housing can be manufactured by the punching precision, which makes it more economical or completely machined, which makes it have high load capacity. internal seals protect the assembly entry powders and liquids, an omen in the lower drainage serves if there were these interlopers.
Galvanized finishes are free of heavy metals (Rohs Compliant) There are optional materials as bases neoprene to cushion deflection. Vertical and ensure uniform load distribution in the recessed exists nylon collar for sound reduction effects.
Transfer Balls are used primarily in workstations, assembly lines and roller conveyors.
The allowable load each Ball Transfer to 10 750 ranges from Lbs. According to the charge, the right way to choose the right ball transfer is taking into account the following criteria:
- The arrangement of the number of balls must be based on the shortest distance of the part to be transferred divided between 2.5.
- The load weight multiplied by a safety factor of 3, including the number of balls transfer the previous step, would result in the maximum capacity we have to look.
- The safety factor is based that will impact loads among others, however, the engineer in charge of selecting this figure may vary depending on experience.